Symbols; Safety Instructions; Allgemeine Sicherheitshinweise - Festool ISC 240 Li Manual De Instrucciones Original

English
Contents
1 Symbols............................................. 14
2 Safety instructions............................ 14
3 Intended use...................................... 15
4 Technical data................................... 16
5 Parts of the machine......................... 16
6 Commissioning..................................16
7 Settings..............................................17
8 Working with the machine................ 19
9 Service and maintenance..................19
10 Accessories....................................... 20
11 Environment...................................... 20
1

Symbols

Warning of general danger
Warning of electric shock
Read the operating instructions and

safety instructions.

Wear ear protection.
Wear protective gloves.
Wear breathing protection.
Wear protective goggles.
Do not dispose of with domestic waste.
Tip, advice
Handling instruction
14
2 Safety instructions
2.1

Allgemeine Sicherheitshinweise

WARNUNG! Lesen Sie alle Sicherheit­
shinweise und Anweisungen. Versäum­
nisse bei der Einhaltung der Sicherheitshinwe­
ise und Anweisungen können elektrischen
Schlag, Brand und/oder schwere Verletzungen
verursachen.
Bewahren Sie alle Sicherheitshinweise und
Anweisungen für die Zukunft auf.
Der in den Sicherheitshinweisen verwendete
Begriff „Elektrowerkzeug" bezieht sich auf
netzbetriebene Elektrowerkzeuge (mit Netzlei­
tung) oder auf akkubetriebene Elektrowerkze­
uge (ohne Netzleitung).
2.2 Machine-related safety instructions
Hold the power tool by insulated gripping
-
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring.Cutting accessory contacting
a "live" wire may make exposed metal
parts of the power tool "live" and could give
the operator an electric shock.
Use clamps or another practical way to se­
-
cure and support the workpiece to a stable
platform. Holding the workpiece by hand or
against your body leaves it unstable and
may lead to loss of control.
- Wait until the power tool has come to a
complete halt before placing it down. The
insertion tool can get caught and lead to a
loss of control of the power tool.
- Do not use deformed or cracked saw
blades or cutting sets or saw blades with
blunt or broken cutting edges.
- The saw blade on the power tool must al­
ways be running when it makes contact
with the workpiece.
-
Wear suitable personal protective equip­
ment: Ear protection, safety goggles, a dust
mask for work which generates dust, and
protective gloves when working with raw
materials and when changing tools.
- Hazardous/toxic dust may be produced
during work (e.g. wood dust or mineral
wool dust). Contact with or inhalation of
this dust may pose a risk for the operating
personnel or persons in the vicinity. Com­
ply with the safety regulations that apply in
your country.