Setting The Unit Of Measurement Of Temperature; Autorestart; Maintenance And Cleaning; Cleaning - Olimpia splendid DOLCECLIMA compact 10 P Instrucciones Para La Instalación, Uso Y Mantenimiento

When the delay time set has elapsed, the overall unit switches off.
c. to cancel the delayed shutdown, press button B8 again until a value of 0 is set.
d. When the timer is active, symbol S2 is activated on the machine and symbol 8 on the remote control.

3.11 - SETTING THE UNIT OF MEASUREMENT OF TEMPERATURE

on pressing buttons SW3 SW4 simultaneously for 3 seconds you can change the temperature unit of
measure indicated on the machine display from CelSiuS (°C) to faHrenHeit (f) and vice versa.

3.12 -AUTORESTART

in case a black-out occurs, the appliance stores the former function mode and start up again when re-pow-
ered by recovering all previous settings.

4 - MAINTENANCE AND CLEANING

Before proceeding with any maintenance and cleaning
intervention, always make sure you disconnected the
power plug from the power socket.
Do not touch the metal parts of the appliance when you
remove the filter.
There is a risk of injury due to the sharp metal edges.
Do not use water to clean the internal parts of the air conditioner.
Exposure to water can ruin the isolation, with the risk of electric shocks.

4.1 - CLEANING

4.1.a - Cleaning the appliance and the remote control

a. use a dry cloth to clean the appliance and the remote control.
b. it is possible to use a cloth moistened with cold water to clean the appliance in case it's very dirty.
Do not use a chemically treated or antistatic cloth to clean the appliance.
Do not use gasoline, solvent, polish or similar solvents.
These products could cause the breakage or deformation of the plastic surface.
EN - 26