Installation Completed; Maintenance; Optional Equipment - Jøtul FS 166 - I 570 Manual De Instrucciones

Fig. 15
B
1. Place the attachment bracket on the special corner stone
223628 (Fig. 15 A). The front stone (Fig. 15 B) of layer 5
shall rest on the attachment bracket.
Fig. 16
A
1. Install the fl ue pipe. Top smoke outlet (Fig. 16 A) or rear
smoke outlet (Fig. 16 B). If a rear smoke outlet: Remove
the knockout in the rear plate (Fig. 16 C).
A
223628
B
C
Fig. 17
F
E
D
B
A
If top smoke outlet:
1. Place the last layer (Fig. 17 A) and the top layer (Fig. 17
B). Use bracket 2, bracket 4 and bracket 6 between the
last layer and the top layer (Fig. 17 C).
2. Remove the knockout and place the top grid (Fig. 17 D).
3. Place the distance pieces (Fig. 17 E), remove the knockout
and place top heat shield (Fig. 17 F).
If rear smoke outlet:
1. Place the last layer (Fig. 17 A) and the top layer (Fig. 17
B). Use bracket 2, bracket 4 and bracket 6 between the
last layer and the top layer (Fig. 17 C).
2. Place the top grid (Fig. 17 D).
3. Place the distance pieces (Fig. 17 E) and place top heat
shield (Fig. 17 F).

6.0 Installation completed

See the General user and maintenance manual for Jøtul I
570 for the use and maintenance of the product.

7.0 Maintenance

If you have the misfortune to fi nd scratches in the surface,
these may be polished out using a fi ne sandpaper. If deeper
scratches are present, a paste made of powdered soap stone
and water glass (sodium silicate) can be made up which you
can use to fi ll the stone.

8.0 Optional equipment

Ash collection system
ENGLISH
C
- cat. no. 50012921
19