Installation; Air Supply; Prior To Installation - Jøtul F 470 Serie Instrucciones Para Instalación

ENGLISH

Air supply

The outside air connection may be fitted directly to the Jøtul F 470
through:
• The base/pedestal/leg or
• through a flexible supply hose from the outside/chimney
(only if the chimney has its own duct for external air) and to
the product's outside air connector.
Fig. 2A, through an outside wall
Fig. 2B, through the floor and ground plate
Fig. 2C, through the floor and basement
Fig. 2D, indirectly through an outside wall
8

4.0 Installation

NB: Check that the fireplace is undamaged before installation
begins.
NB: The product is heavy! Ensure you have help when positioning
and installing it. Make sure the product does not topple over.
NB: The door must not be lifted using the handle before the
weights have been mounted. You will find the Installation and
Operating instructions and a bag of screws in the smoke outlet.
NB: Read the Installation and Operating instructions carefully
before installing the fireplace!

4.1 Prior to installation

The standard product comes in three or more consignments
One with the fireplace itself, one with the base, pedestal or leg
and side panels.
You will need the following tools to install the product: Spirit
level, ratchet with 10 mm and 13 mm sockets and hex keys with
4 mm and 5 mm sockets.
Fig. 3
1. Remove the packaging (cardboard and wooden frame) and
spread the cardboard out on the floor behind the fireplace.
2. Leave the stove standing on the transport pallet.
3. Remove the top plate (Fig. 3 A) with the top grate (Fig. 3 B).
4. Push the product's right-hand and left-hand weights (Fig. 3 C)
out from the wooden pallet and put them to one side.
5. Check that the control handles (Fig. 3 D) move freely.