Perform Video Monitor Setup; Keyboard Language Setup - Pioneer SVM-1000 Manual De Instrucciones

PERFORM UTILITY SETUP

PERFORM VIDEO MONITOR SETUP

Set the video monitor output method.
Video monitor setup
1 Hold the UTILITY (SET UP) button depressed.
This will initiate the utility setup mode.
2 Touch [VIDEO MONITOR].
The video monitor setup screen will be displayed.
• When turning the power ON, [MASTER] will be selected.
3 Touch each applicable button.
Touch each applicable button on the screen to operate the
video monitor setup.
4 Touch [EXIT].
This will end the utility setup mode.
MASTER The master output is sent directly to the
monitor output.
MIRROR OF
The master output is flipped horizontally
MASTER and sent to the monitor output.
MASTER & Both master output and channel output
CHANNEL are sent to the monitor output.
CHANNEL
All channels' outputs are sent to the
monitor output.

KEYBOARD LANGUAGE SETUP

By connecting a keyboard to the USB connector, text can be
entered through the keyboard during text edit mode (P. 22). Follow
these steps to set up the connected keyboard type.
Keyboard language setup
1 Hold the UTILITY (SET UP) button depressed.
This initiates the utility setup mode.
2 Touch [KEYBOARD LANGUAGE].
The keyboard language setup screen will be displayed.
• When turning the power ON, [UK ENGLISH] will be selected.
3 Touch each applicable button.
Touch each applicable button on the perform keyboard
language setup.
4 Touch [EXIT].
This will end the utility setup mode.
* With keyboards other than those listed, the characters
actually appearing may be different from those pressed.
41
En