Touch Panel Settings; Top Panel; Bottom Panel; Returning To Default Settings - Pioneer SVM-1000 Manual De Instrucciones

HARDWARE SETUP

TOUCH PANEL SETTINGS

1 Touch [TOUCH PANEL]
The touch panel setting screen will be displayed.
2 Touch either [TOP PANEL] or [BOTTOM PANEL] to select
settings.

TOP PANEL

BOTTOM PANEL

3 Touch the [+] mark with a pointed object such as a pen.
Use a stylus pen or other type pen without a sharp tip.
44
En
Calibrates the TOP panel.
Calibrates the BOTTOM panel.
4 Touch all [+] marks and make sure the color of the [+] marks
are inverted.
5 Touch [SAVE] to save the settings.
The settings will not be implemented unless [SAVE] is
touched.

RETURNING TO DEFAULT SETTINGS

1 Press [FACTORY PRESET].
The factory preset screen will be displayed.
2 Touch to choose either [YES] or [NO].

ENDING HARDWARE SET UP

1 Set the [POWER] switch to OFF.