Precautions And Conditions For Use; Safety Instructions; Installation Conditions - Astralpool 54068-MB Manual Tecnico

ASTRALPOOLHEAT SERIES · AIR/WATER SYSTEM ASTRALPOOLHEAT SERIES · AIR/WATER SYSTEM
ASTRALPOOLHEAT SERIES · AIR/WATER SYSTEM ASTRALPOOLHEAT SERIES · AIR/WATER SYSTEM

3. 3. 3. 3. PRECAUTIONS AND CONDITIONS FOR USE

PRECAUTIONS AND CONDITIONS FOR USE
PRECAUTIONS AND CONDITIONS FOR USE PRECAUTIONS AND CONDITIONS FOR USE
3.1. 3.1. 3.1. 3.1.

SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS
Read the safety instructions prior to any manipulation:
Any incorrect manipulation may cause serious damages to to to to the unit Any incorrect manipulation may cause serious damages
Any incorrect manipulation may cause serious damages Any incorrect manipulation may cause serious damages
could involve deadly injuries could involve deadly injuries could involve deadly injuries. . . . could involve deadly injuries
Do not place heavy objects, pull, damage, heat up
or modify the electrical plug. The cable would be
damaged and it would cause electric discharges
and fire risk.
Never introduce rods, finger or other items in the
air inlet / outlet. The fan operates at great speed,
being able to cause a very serious incident.
Do not connect / disconnect the unit in use. It can
cause a fire due to the sparks, etc.
If any anomaly takes place (burning smell, etc.),
stop the unit, retrieve the plug or turn the power
off.
The unit must never be put under water or mud
discharges and the water outlet should never be
located in places exposed to strong winds.
Do not pull the power supply cord. There is a risk
of fire if the electrical cable is ripped off.
When unit maintenance must be undertaken,
switch it off and disconnect the unit or turn the
power off. The fan operates at great speed, being
able to cause a very serious incident.
Do not manipulate the plug with wet hands, since
it could cause an electrical discharge. In case of
storm, switch the heat pump off to avoid lightning
related damages.
3.2. 3.2. 3.2. 3.2.

INSTALLATION CONDITIONS

INSTALLATION CONDITIONS INSTALLATION CONDITIONS INSTALLATION CONDITIONS
Do not install the unit near a flammable gas source, since a gas leak may occur and cause an
explosion.
According to the place where the unit must be
installed (humid place, etc.), install electrical
protection by a 30 mA differential circuit breaker.
Otherwise, an electrical discharge may take place.
Do not leave a damaged installation.
The unit could cause an accident.
Verify power supply compatibility with the data specified in the unit before installing the heat pump.
© ASTRALPOOL 2015 ALL RIGHTS RESERVED. PROPRIETARY DOCUMENT
the unit and to the user and to the user that
the unit the unit and to the user and to the user
:
IMPORTANT IMPORTANT IMPORTANT IMPORTANT Keep the plug clean. If dirt adheres
to the plug or if does not plug in properly, it may
cause a fire or electric shocks.
KEEP AWAY FROM CHILDREN KEEP AWAY FROM CHILDREN
KEEP AWAY FROM CHILDREN KEEP AWAY FROM CHILDREN
If the unit continues working in abnormal
conditions, it can cause a fire or damages. Check
with its installer.
The repair or installation should never be
performed by the client.
Connection:
Do not tie an earth wire to a gas or water pipe,
bright-line viewfinder or telephone plug. This
would cause a fire risk.
Do not place animals or indoor plants in direct
contact with the air outlet. This would cause
injury to the animals and plants.
When the unit may not be used for some time,
unplug it or turn the power off. It could
accumulate vegetation and dust and cause a fire.
Do not vaporize with insecticide or any other
flammable spray in the direction of the heat
pump. This would cause a fire and the distortion
of the housing.
Condensers must have been completely drained.
Otherwise, the water could leak out of the unit
and dampen and damage its components.
Do not mount or place anything upon the unit.
The fall of the object or the unit could cause an
accident.
.
ENGLISH ENGLISH ENGLISH ENGLISH
that
that that
Pag: 12