Types Of Beat Effect; Multi Tap Delay - Pioneer DJM-2000 Manual De Instrucciones

Mesa de mezclas dj
Ocultar thumbs Ver también para DJM-2000:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 144

Types of BEAT EFFECT

DELAY
1
Original
(4 beats)
1/2 delay
(8 beats)
This function outputs a delay sound once according to the beat button's fraction.
When 1/2 beat delay sound is added, 4 beats become 8 beats.
Use these to set the delay time from 1/8 to 4/1 with respect to 1
Beat buttons (parameter 1)
beat of BPM time.
Use this to set the delay time.
TIME (parameter 2)
1 to 4000 (ms)
LEVEL/ DEPTH (param-
Use this to set the balance between the original sound and the
eter 3)
delay sound.
EFFECT FREQUENCY
Use these to set the balance between the original sound and
(parameter 4)
the delay sound for the different bands.
ECHO
1 2
1 beat
This function outputs increasingly attenuated delay sounds several times accord-
ing to the beat button's fraction.
With 1/1 beat echoes, the delay sounds are faded out according to the track's
tempo even after the input sound has been cut.
Use these to set the delay time from 1/8 to 4/1 with respect to 1
Beat buttons (parameter 1)
beat of BPM time.
Use this to set the delay time.
TIME (parameter 2)
1 to 4000 (ms)
LEVEL/ DEPTH (param-
Use this to set the balance between the original sound and the
eter 3)
echo sound.
EFFECT FREQUENCY
Use these to set the balance between the original sound and
(parameter 4)
the echo for the different bands.

MULTI TAP DELAY

1
MIN
MAX
1/1 beat
MIN
MAX
1/4 beat
MIN
MAX
1/8 beat
EFFECT FREQUENCY
This function outputs up to 7 delay sounds in 1/8 units, according to the beat
button's fraction.
The volume of the delay sound can be adjusted with the [EFFECT FREQUENCY]
controls.
The volume of the odd delay sounds is adjusted from [MIN] to the center posi-
tion, the volume of the even delay sounds is adjusted from the center position to
[MAX].
The effect time is set from 1/8 to 4/1 with respect to 1 beat of
Beat buttons (parameter 1)
BPM time.
Use this to set the delay time.
TIME (parameter 2)
10 to 4000 (ms)
LEVEL/ DEPTH (param-
Use this to set the balance between the original sound and the
eter 3)
delay sound.
EFFECT FREQUENCY
This sets the volume of the delay sound for the different bands.
(parameter 4)
22
En
Input sound turned off
Fade-out
Time
Time
REVERB
1 2
Direct sound
Early reflected sound
Level
Reverberations
1%
100%
This function adds a reverberation effect to the input sound.
Beat buttons (parameter 1) These set the degree of the reverb effect from 1 to 100 %.
Use this to set the degree of the reverb effect.
TIME (parameter 2)
1 to 100 (%)
LEVEL/ DEPTH (param-
Sets the balance between the original sound and the effect
eter 3)
sound.
EFFECT FREQUENCY
Use these to set the balance between the original sound and
(parameter 4)
the effect sound for the different bands.
ROLL
1 2
Original
Effect turned on
1/1 roll
Repeated
This function records the input sound at the point at which the [ON/ OFF] but-
ton is pressed and repeats the recorded sound according to the beat button's
fraction.
The effect time is set from 1/8 to 4/1 with respect to 1 beat of
Beat buttons (parameter 1)
BPM time.
Use this to set the effect time.
TIME (parameter 2)
10 to 4000 (ms)
LEVEL/ DEPTH (param-
Use this to set the balance between the original sound and
eter 3)
ROLL.
EFFECT FREQUENCY
Use these to set the balance between the original sound and
(parameter 4)
the ROLL for the different bands.
SLIP ROLL
1 2
Original
Changed from 1/2
Effect turned on
to 1/1
Roll
1/2 repeat
This function records the input sound at the point at which the [ON/ OFF] but-
ton is pressed and repeats the recorded sound according to the beat button's
fraction.
When the effect time changes, the input sound is recorded again.
The effect time is set from 1/8 to 4/1 with respect to 1 beat of
Beat buttons (parameter 1)
BPM time.
Use this to set the effect time.
TIME (parameter 2)
10 to 4000 (ms)
LEVEL/ DEPTH (param-
Use this to set the balance between the original sound and
eter 3)
ROLL.
Use these to set the balance between the original sound and
EFFECT FREQUENCY
(parameter 4)
the ROLL for the different bands.
Time
1/1 repeat

Publicidad

Tabla de contenido
loading

Tabla de contenido