Legal Information - Ottobock AeroLink 6A50 Instrucciones De Uso

7 Cleaning
CAUTION
Reuse on other patients and improper cleaning
Skin irritation, formation of eczema or infections due to contamination with
germs
► Only use the product for a single patient.
► Clean the product regularly.
► Inform the patient.
Dirt in the inner socket impairs the functionality of the exhaust valve. When
the outer socket gets contaminated, this may cause damage to the connect­
or.
1) Rinse the product with clear fresh water.
2) Dry the product with a soft cloth.
3) Allow to air dry in order to remove residual moisture.
8 Maintenance
► The prosthetic components should be inspected after the first 30 days of
use.
► Inspect the entire prosthesis for wear during normal consultations.
► Conduct annual safety inspections.

9 Legal Information

9.1 Liability
The manufacturer will only assume liability if the product is used in accord­
ance with the descriptions and instructions provided in this document
(Instructions for Use). The manufacturer will not assume liability for damage
caused by disregard of this document.
9.2 CE Conformity
This device meets the requirements of the 93 / 42 / EEC guidelines for med­
ical devices. This device has been classified as a class I device according to
the classification criteria outlined in appendix IX of the guidelines. The
declaration of conformity was therefore created by the manufacturer with
sole responsibility according to appendix VII of the guidelines.
9.3 Warranty
The manufacturer warrants this device from the date of purchase. The war­
ranty covers defects that can be proven to be a direct result of flaws in the
material, production or construction. Because warranty conditions may differ
28 | Ottobock