Technical Data; Description Du Produit; Legal Information; Conception Et Fonctionnement - Ottobock 4R63 Instrucciones De Uso

2) Dry the product with a soft cloth.
3) Allow to air dry in order to remove residual moisture.
7 Maintenance
► A visual inspection and functional test of the prosthetic compon­
ents should be performed after the first 30 days of use.
► Inspect the entire prosthesis for wear during normal consulta­
tions.
► Conduct annual safety inspections.
8 Disposal
In some jurisdictions it is not permissible to dispose of the product
with unsorted household waste. Improper disposal can be harmful to
health and the environment. Observe the information provided by the
responsible authorities in your country regarding return, collection
and disposal procedures.

9 Legal information

All legal conditions are subject to the respective national laws of the
country of use and may vary accordingly.
9.1 Liability
The manufacturer will only assume liability if the product is used in
accordance with the descriptions and instructions provided in this
document. The manufacturer will not assume liability for damage
caused by disregarding the information in this document, particularly
due to improper use or unauthorised modification of the product.
9.2 CE conformity
The product meets the requirements of Regulation (EU) 2017/745 o n
medical devices. The CE declaration of conformity can be down­
loaded from the manufacturer's website.
9.3 Warranty
The manufacturer warrants this device from the date of purchase. The
warranty covers defects that can be proven to be a direct result of
flaws in the material, production or construction and that are reported
to the manufacturer within the warranty period.
Further information on the warranty terms and conditions can be
obtained from the competent manufacturer distribution company.

10 Technical data

Reference number
Weight [g]
System height [mm]
Material
Max. body weight [kg]

1 Description du produit

INFORMATION
Date de la dernière mise à jour : 2020-09-07
► Veuillez lire attentivement l'intégralité de ce document avant
d'utiliser le produit ainsi que respecter les consignes de sécuri­
té.
► Apprenez à l'utilisateur comment utiliser son produit en toute sé­
curité.
► Adressez-vous au fabricant si vous avez des questions concer­
nant le produit ou en cas de problèmes.
► Signalez tout incident grave survenu en rapport avec le produit,
notamment une aggravation de l'état de santé, au fabricant et à
l'autorité compétente de votre pays.
► Conservez ce document.

1.1 Conception et fonctionnement

Les ancres à couler 4R63, 4R68 et 4R100 se montent par stratifica­
tion dans une emboîture de prothèse transtibiale. Elles permettent le
4R63 4R68 4R100
95 70
-7
Stainless Aluminium Titanium
steel
136 100
40
Français
11