Operation; Switching On And Off; Zero Setting; Tare Setting - Mettler Toledo ICS226 Instrucciones De Manejo

8

Operation

3 Operation

3.1 Switching on and off

3.1.1 Switching on
➜ Press and hold
The scale performs a self-test. If the self-test is successful, the display lights up and
shows the software number.
3.1.2 Switching off
➜ In simple weighing mode, press and hold

3.2 Zero setting

Zero setting corrects the influence of slight changes on the load plate.
➜ Press .
The scale is set to zero.

3.3 Tare setting

➜ Place an empty container on the scale and press
The scale is set to zero and the NET indicator appears.

3.4 Switching units

9 F2.1.1 = On is set in the operator menu.
➜ Press to switch between the main and second unit.

3.5 Checkweighing

3.5.1 Operation
9 F2.2.1 = On is set in the operator menu.
➜ Press to enter checkweighing mode.
The scale starts checkweighing as soon as the net weight is greater than 10d.
until the display lights up.
until -OFF- is displayed.
.
ICS226 30232252A