Operation; Switching On Or Off; Zeroing / Taring The Scale; Factor Weighing - Mettler Toledo RPA455 Guía Rápida

8

Operation

3 Operation

3.1 Switching On or Off

➜ Press and hold the Power button

3.2 Zeroing / Taring the Scale

1. Place the empty container on the scale.
2. Press any of the two Zero/Tare buttons
The zero weight value appears.
NOTE: The two Zero/Tare buttons
allow either right-handed or left-handed scale operation.

3.3 Factor Weighing

Factor weighing allows you to weigh a paint mix 0.1 up to 7 times the formula of a
fixed weight and save the effort of recalculation.
Example
The weight value on the display is 1000 g. The factor is set to 0.2. Then the actual
weight is 200 g.
Setting Factors
A. Setting factors in the Main screen
30470211 | B | 12/2019
until the display lights go on/off.
to zero or tare the scale.
have the identical zero and tare function and
1000 g
× 0.2
Actual weight: 200 g
➜ Press to toggle between the factor values of
0.2, 0.5, 0.75, 1.5, 2.0, 3.0, 4.0, 5.0.
➜ When the factor is set to a value other than
1, pressing and holding
to 1.
➜ When the factor is 1, pressing and holding
navigates the display to the Factor Value
Setting.
METTLER TOLEDO Quick Guide RPA455 / RPA455x / RPA455xx
resets the factor