Preparation For Use; Instructions For Use - Ottobock 4R111 Instrucciones De Uso

Fig. Item Quantity
– – 1 ( )
– – 1 ( )
– – 1 (
– – 1 (
– – – ( )
The following parts are
only for:
4 – 1 ( )
– – 4 (
The following parts are
only for:
5 – 1 ( )

5 Preparation for Use

CAUTION
Incorrect alignment or assembly
Injuries due to fall resulting from damaged prosthesis components
► Observe the alignment and assembly instructions.
CAUTION
Improper assembly of the screw connections
Fall due to breakage or loosening of the screw connections
► Clean the threads before every installation.
► Apply the specified installation torque values.
► Observe the instructions for securing the screw connections and the
use of the correct length.
CAUTION
Wrong processing of the anchor arms of the lamination anchor
Fall due to breakage of the anchor arms
► Only bend anchor arms made of steel.
► Avoid excessive or too frequent bending of the anchor arms.
► Use the 711S4* bending irons for bending.
4R111, 4R111=N, 4R116 lamination anchors
Designation

Instructions for use

Lamination anchor
) Cap screw
) Spherical washer
Lamination dummy
Lamination anchor
Pyramid receiver with threaded con­
nector
) Set screw
Lamination anchor
Pyramid adapter with threaded con­
nector
Reference num­
ber
647G123
–
501Z2=M5x30
507U16=5.2-NIRO
4X46
4R111
4R44=N
506G3=M8x12-V
4R116
4R87
Ottobock | 15