3.5 S evenGo™ clip
The SevenGo™ clip is an electrode holder that can be placed next to the display on either side of
the housing.
The SevenGo™ clip cannot be used for InLab
51710917_V02.2011_BA_SG9_98_EnFrEs.indb 9
OptiOx sensors.
®
●
To mount the clip, remove the cover over the clip's fixing point
using your thumbnail.
●
Attach the clip by pressing it into the recess.
●
Slide the shaft of the sensor into the clip from the top.
●
Rotate the sensor around the clip's axis to switch between the
stor a ge and working positions.
Installation
11
21.04.2011 11:45:49