Service Instrument; Service O2 Channel - Hach ORBISPHERE 3100 Manual Básico Del Usuario

6.6 Service instrument

1. Board information
Option
Board information This option is useful for troubleshooting purposes and displays information about the
2. Temperature checking
Option
Temperature checking This option is useful for troubleshooting purposes and displays the temperature
3. Sample temperature calibration
Option
Sample temperature
calibration
4. Miscellaneous
Option Description
Enable raw Check the box to enable the capture of raw data which is useful for troubleshooting
data logger purposes
Activate Check the box to activate the service timer option.
service timer
When activated, the instrument will automatically remind the user when the next sensor
service is due.
Enter the Nb of days between services in the box provided. This defines the due date of
the next sensor service.
If activated, select the Reset service timer option each time the instrument has been
serviced. This automatically sets the Last service date parameter to the current date.
Note: The total uptime of the instrument is displayed at the bottom of the screen.

6.7 Service O2 channel

1. O2: Calibration parameters
Option
O2: Calibration
parameters
2. O2: DC measurement parameters
Option
O2: DC measurement
parameters
20 English
Description
mother board, measurement board and battery
Description
readings of the measurement board, pigtail, battery pack and sample
Description
You will need a sensor simulator for this option. Follow the on-screen
instructions to calibrate the sample temperature
Description
This option is useful for troubleshooting purposes and will display a number of
values associated with the measurement channel
Description
This option is useful for troubleshooting purposes and will display the
values of the fluorescent and reference LED current