Conditions That Affect Weld Bead Shape - Miller Syncrowave 200 Manual Del Propietário Y Guía

9-7.

Conditions That Affect Weld Bead Shape

Angle Too Small
Electrode Angle
Arc Length
Too Short
Travel Speed
Slow
9-8. Electrode Movement During Welding
1
Correct Angle
° - °
10 30
Drag
Normal
Normal
2
3
.
Weld bead shape is affected
by
length, travel speed, and thick-
ness of base metal.
Angle Too Large
Spatter
Too Long
Fast
.
Normally, a single stringer
bead is satisfactory for most
narrow groove weld joints;
however, for wide groove weld
joints or bridging across gaps,
a weave bead or multiple
stringer beads work better.
1 Stringer Bead − Steady
Movement Along Seam
2 Weave Bead − Side to Side
Movement Along Seam
3 Weave Patterns
Use weave patterns to cover a
wide area in one pass of the elec-
trode. Do not let weave width ex-
ceed 2-1/2 times diameter of
electrode.
electrode angle, arc
S-0061
S-0054-A
OM-225 389 Page 39