Technical Data; First Use; Explosion Risk - SATA HRS Instrucciones De Servicio

7. Technical Data

Description
Average spraying pressure
Max. spraying pressure
Max. temperature of the coating mate-
rial
Air consumption at 3.0 bar
Nozzle diameter
Air connection thread
Weight version HRS without flow con-
trol
Weight version HRS with flow control
Weight version HRS-E with flow control

8. First Use

The pressurized cup spray gun is supplied fully assembled and ready for
operation.
After unpacking, check:
■ Pressurized cup spray gun damaged
■ Scope of supply complete (see chapter 5)
Warning!

Explosion risk

The use of unsuitable compressed air hoses may cause explosions.
→ Only use solvent-resistant, antistatic, undamaged and technically
flawless compressed air hoses with permanent pressure resistance of
minimum 20.0 bar,, inner diameter of minimum 9 mm and bleeder re-
sistance of < 1MOhm, such as SATA air hose (Art. No. 53090).
Operating Instructions SATA HRS
Variation
with plas-
tic pressure
4.0 bar – 6.0
6.0 bar
50 °C
approx. 100
Nl/min
1.5 mm
1/4'' outer
thread
1010 g
Variation
with alumini-
um pressure
cup
4.0 bar – 8.0
bar
10.0 bar
80 °C
approx. 100
Nl/min
1.5 mm
1/4" outer
thread
920 g
– 940 g
– 1300 g
EN
cup
bar
117