Normal Operation - SATA HRS Instrucciones De Servicio

Ocultar thumbs Ver también para HRS:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 131
Operating Instructions for SATA HRS
US
Information!
Use a compressed air connection with a 1/4" male thread or suitable
SATA quick connect nipple.
Use uncontaminated compressed air by using an SATA filter 484 (Art.
No. 92320), for example.
■ Check all screws for tightness.
■ Connect compressed air line to flushing connection [1-12].

9. Normal Operation

Check with the manufacturer prior to using the pressure spray gun to
ensure that the cleaning and preservative media can be used with the
pressure spray gun.
9.1. Operation
Danger!
Risk of injury due to whip-like motion of wand
The material flowing out in combination with the compressed air can
cause the wand to whip around, resulting in injuries.
→ Before using the trigger, hold wand tightly and secure from whipping
around.
Notice!
Damage due to incorrect cleaning media used to clean the
pressure spray gun
The use of aggressive cleaning media to clean the pressure spray gun
can damage the pressure spray gun.
→ Do not use aggressive cleaning media.
→ Use neutral cleaning media with a pH value of 6 – 8.
→ Do not use acids, alkalis, bases, paint stripper, unsuitable regenerate
material or other aggressive cleaning media.
→ Contact the cleaning media manufacturer to clarify which chemicals
are used in the cleaning media.
Information!
When using cleaning media, use plastic pressure cups only.
Aluminum pressure cups are recommended when using preservatives.
480

Publicidad

Tabla de contenido
loading

Tabla de contenido