Eu Declaration Of Conformity - SATA HRS Instrucciones De Servicio

Operating Instructions for SATA HRS
US
Art.
No.
[6-7] 12591 *
[6-8] 157305
[6-9] 95190
[6-10] 95208
[6-11]
68890 *
[6-12]
15438 ** Paint needle packing
[6-13]
11973
[6-14] 54049 *
[6-15] 8359
[6-16] 11510
[6-17] 17111
[6-18] 11445 *
[6-19] 11544 *
[6-20] 53082 *
[6-21] 10322
[6-22]
182 *
161158
* Available in repair kit 161158 only

16. EU Declaration of Conformity

Manufacturer:
SATA GmbH & Co. KG
Domertalstrasse 20
D-70806 Kornwestheim
We hereby declare that the product named in the following, on the basis of
its conception, construction and type of construction in the model we have
brought onto the market, corresponds to the fundamental safety require-
ments of the 2014/34/EC guideline including the changes applicable at the
time of this declaration and can be used according to EC-Directive 2014/34/
EC as well as having regard to the ATEX product identification in explo-
sion-hazard areas.
Product description: .................................................................. spray gun
Type description: ...................................................................... SATA HRS
ATEX classification: ..................................................................... II 2 G T4
490
Description
Bracket bolt
Trigger
Suction pipe for HRS-E
Washer
Valve, complete
Pressure pot, aluminum
Sealing ring
Quick connect coupling
Mixing cap
Safety valve
Pressure spring for air piston
Compression spring for paint needle
O-ring 0.5" x 0.1", made of Perbunan
Guide bushing
Counter nut
HRS repair kit
** Available as service unit
Quan-
tity
1 ea.
1 ea.
1 ea.
1 ea.
1 set
1 set
1 ea.
4 ea.
1 ea.
1 ea.
1 ea.
1 ea.
1 ea.
1 ea.
1 set
1 ea.
1 set