Safety Regulations; Key To Caution And Instruction Labels - Corghi ProLine Truck 150 Manual De Uso

SAFETY
REGULATIONS
WARNING
Failure to observe these instructions and
warnings can cause serious injuries to
operators or any other person present.
Do not operate the machine until you
have read and understood all the danger/
warning/caution notices in this manual.
The correct use of this machine requires
a qualified and authorised operator. This
operator must be able to understand the
manufacturer's written instructions, be
suitably trained and be familiar with the
safety procedures and regulations. Operators
must never use drugs or alcohol which could
impair their physical and mental abilities.
The following conditions are essential under
any circumstances:
- be able to read and understand the
information in this manual;
- understand the capabilities and
characteristics of this machine;
- keep unauthorised persons clear of the
work area;
- make sure that the machine has been
installed in compliance with legislation and
standards in force;
- make sure that all operators are suitably
trained, that they are capable of using the
equipment correctly and safely and that they
are adequately supervised during their work;
- do not touch power lines or the inside
of electric motors or any other electrical
equipment before making sure that they
have been powered off;
- read this manual thoroughly and learn how
to use the equipment correctly and safely;
- always keep this manual in an easily
accessible place and refer to it whenever
appropriate.
WARNING
Do not remove or make the DANGER,
82
CAUTION, WARNING or INSTRUCTION
labels illegible. Replace any missing or
illegible labels. If one or more labels have
been detached or damaged, they can be
replaced by your nearest manufacturer
dealer.
- Observe the standardised industrial
accident prevention regulations for high
voltage and rotating machinery whenever
the machine is in use or being serviced.
- The manufacturer shall not be liable for
any damage or accident resulting from
unauthorised alterations or changes to
the machine. In particular, tampering or
removing the safety devices is a breach of
the regulations relating to Safety at work.
WARNING
During work and maintenance operations,
always tie back long hair and do not wear
loose clothing, ties, necklaces, wristwatches
or any other items that may get caught up
in the moving parts.
Key to caution and instruction
labels
Never use the wheel spin
shaft as a lifting point for
the machine.
Unplug the power supply
cable before performing
m a i n t e n a n c e / r e p a i r
operations on the machine.
Do not lift up the guard
when the wheel is turning.
User manual ProLine Truck 150