Automatic Time Limit; Basic Settings; Changing The Basic Settings - Bosch PKT375N14E Instrucciones De Uso

Automatic time limit

If a hotplate has been switched on for a long time without the
setting being changed, the automatic time limit is activated.
The hotplate stops heating.
indicator flash alternately on the hotplate display.

Basic settings

Your appliance has various basic settings. You can adapt these
settings to your own personal needs.
Indicator Function
™ƒ Audible signal
Confirmation signal and operation error signal are switched off.
‹
Only the operation error signal is switched on.
‚
Confirmation signal and operation error signal are switched on.*
ƒ
Automatic timer
™†
Switched off.*
‹
‚ - ŠŠ Cooking time, after which the hotplates switch off
Duration of the timer end signal
™‡
‚ 10 seconds.
30 seconds
ƒ n
1 minute.*
„
Resetting to basic setting
™‹
‹ Switched off.
Switched on.
‚
*Basic setting

Changing the basic settings

The hob must be switched off.
Switch on the hob.
1.
Within the next 10 seconds, touch the
2.
4 seconds.
and the / residual heat
" ‰ • œ
r symbol for
The display goes out when you touch any control. You can
make new settings.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
Touch the symbol repeatedly until the desired indicator
r
3.
appears on the display.
Set the desired value on the settings range.
4.
Touch the symbol for 4 seconds.
r
5.
The setting is activated.
Switching off
To exit the basic setting, switch off the hob with the main switch
and make new settings.
15