Integra MAYFIELD Infinity XR2 Manual De Instrucciones página 11

Mounting of MAYFIELD Skull Pins
NOTE: Use only MAYFIELD brand Skull Pins with this Skull Clamp. Refer to Skull Pin
Instructions For Use for further information.
Carefully inspect reusable skull pins before each use. To maintain proper fixation,
pins should be of equal length. Damaged (dull, bent, etc.) pins should be replaced. It
is recommended that spare pins always be kept available.
Never attempt to resharpen skull pins. Dull or bent pins should be replaced.
NOTE: When using MAYFIELD Skull Pins, follow Instructions For Use supplied with
the product.
Skull pins are not recommended for use on children under five (5) years of age and
extreme caution should be exercised in pediatric cases because of the thin skull.
MAYFIELD Child Skull Pins are recommended for young children over the age of five
(5) years. It is at the discretion of the user, when the adult or child skull pins should
be used.
Only MAYFIELD branded skull pins be used with MAYFIELD Skull Clamps. Integra
does not offer warranty protection when a Non-MAYFIELD brand skull pin is used
with a MAYFIELD Skull Clamp.
CAUTION: 60 lbs. (267 N) of force is recommended for adults. 40 lbs (178 N) of force
is recommended for children. All force settings are at the user's discretion. Never
exceed 80 lbs. (356 N) of force.
Seat pins so there is no gap
between the shoulder of the pin
and the face of the socket
Childs Rocker Arm
Adult Rocker
Figure 6 Mounting Skull Pins
CAUTION!
WARNING!
WARNING!
CAUTION!
CAUTION!
Page 9