Using The "Speed" Mode - Stryker Flosteady Manual De Instrucciones

Operating the Device
The "Turbo" function is automatically stopped after 2 minutes. While the device Stopping the "Turbo" function
EN
is running, press the "Turbo" function field to stop the function before the "Tur-
bo" time expires. This returns the pump immediately to the previously set oper-
ating values.
5.9

Using the "Speed" Mode

The function of the "Speed" mode consists of keeping pressure drops at a mini-
mum and to raise the actual pressure more quickly than in the original mode to
the level of the nominal pressure in case of leaks or strong suction (e.g. when
opening the shaver).
The "Speed" mode is deactivated at the factory and can be activated for Single
Use Cassette Tubing in the user menu if so desired (see chapter 7 "User Menu").
NOTE!
The Speed Mode is only available for Single Use Cassette Tubing and must be ac-
tivated once at the user menu.
NOTE!
The Speed Mode of the FloSteady Arthroscopy Pump (Model 150) is not available
if a Day Use Tubing is used.
27