User Menu - Stryker Flosteady Manual De Instrucciones

7

User Menu

Device parameters are changed and displayed with the user menu.
Set Set
Pres sure Pres sure
Back
without
save
1. Turn the device on as described in chapter 5.3 "Switching On Device".
2. Wait until the device check has finished.
3. Press the (MENU) key. The touch panel depicts User Menu and the corre-
sponding function fields used for navigation. Press the function fields º or »
to toggle between user menu and service menu. The service menu is protect-
ed from unauthorized access with a numeric code only known to the service
technician.
4. Confirm selecting User Menu by pressing the function field (Enter).
5. Press the function fields º or » to toggle between the menu items Language,
Volume, Wash pressure increase, Wash time, Brightness, Instrument Selec-
tion, Factory settings, and Speed Mode for Single Use.
6. Confirm (select) the desired menu item by pressing the function field (enter).
7. Use the function fields º or » to select the desired setting within the menu
item.
8. Save the setting by pressing the function field (enter).
9. Exit the user menu by pressing the function field (exit). The function display
again shows Start pump.
The following chart provides an overview over the possible settings.
Actu al Actu al
Max Max
Pres sure Pres sure
Flow Rate Flow Rate
Start pump Start pump Start pump Start pump
Star t Star t
Men u Men u
Stop Stop
Control elements and display/function
fields to configure user menu
Select
Confirm/
Save
User Menu
EN
33