Metz MECABLITZ 54 MZ-3 Instrucciones De Manejo página 58

Stroboscopic mode
Modo flash stroboscopico
Funcionamiento Estroboscópico
very dark or far behind the moving subject. Best
results are achieved with a low ambient light
level.
Table 5 of the Technical Data specifies the maximum
partial light output levels for N - f(Hz) combinations.
Ensure that a sufficiently slow shutter speed is set on
the camera.
Table 6 of the Technical Data specifies the fastest came-
ra shutter speeds for the N - f(Hz) combinations.
58