Wide-Angle Diffuser - Metz MECABLITZ 54 MZ-3 Instrucciones De Manejo

Special functions
Funzioni speciali
Funciones especiales
• Turn the setting disk until „AutoZoom" reappears on
the display.
• Press the setting disk in the direction of the arrow to
store the setting. The setting is automatically stored
after 5 seconds if the setting disk is not pressed. The
arrow symbol ceases to flash.
The camera on to which the flash unit is moun-
ted must be switched on!
12.10 m-ft changeover
• Turn off the mecablitz with its main switch.
•Press the button Select and simultaneously slide the
main switch from OFF to ON.

13. Wide-angle diffuser

Pull the wide-angle diffuser out from underneath the
main reflector until the stop point is reached and then
release. The main reflector automatically moves to 20
mm zoom position and the wide-angle diffuser automati-
cally folds upwards. The distances and the zoom value
are corrected on the LC display.
To insert the wide-angle diffuser turn it 90° down, and
push in entirely.
Modes that operate with measuring pre-flash or high-
speed synchronisation (HSS) must not be set when wor-
king with wide-angle diffuser or reflector attachments
such as colour filters, neutral density filter, Mecabounce,
etc.
80