Re-Establishing The Basic Setting - Metz MECABLITZ 54 MZ-3 Instrucciones De Manejo

Special functions tor for the second picture are indicated.
Funzioni speciali After the second shot, the display changes to „Fb 3" and
additionally indicates "EV" and the plus correction factor
Funciones especiales
for the third exposure.
„Fb", „EV" and the correction value are all cancelled
after the third shot.
The activating procedure must be repeated for a
new flash bracketing sequence.
To abort flash bracketing simply switch off the mecablitz
briefly with the main switch.

12.8 Re-establishing the basic setting

Keep the Mode button depressed for at least 3 seconds
to return the mecablitz to the basic setting. The adjusted
operating mode is retained.
The following settings are cancelled:
• The TTL sub-modes „HSS",, „ETTL", „3D" and the
Remote modes
• The manual sub-mode „HSS"
• The manually entered partial light output levels
• Flash bracketing „Fb"
• Focal length adaptations „E", „APS", „F1" and „F2"
• Second-curtain synchronisation (REAR)
• The modelling light function
• Manually entered partial output light levels
• Locking the controls
The following settings are retained:
• Automatic shut-off after 10 minutes
• The „Bleep" function ON
• „Auto Zoom" ON
76