Operate The Bark Control Collar; Turning The Unit On/Off; Test Mode - SportDOG NOBARK SBC-8 Manual De Funcionamiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
STEP: 02

OPERATE THE BARK CONTROL COLLAR

TURNING THE UNIT ON/OFF

Press and hold the On/Off button (located between the Contact Points) for about one second - the unit
will power on immediately, as well as tone. To turn the unit off, press and hold the On/Off button for three
seconds. A tone will sound, then the unit will turn off.

TEST MODE

NOTE: TEST MODE is not a functional mode of correction for dogs and should not be used for training. Test
mode is for the user to test the static stimulation to ensure the unit is functioning and should be used with
the provided Test Light Tool.
TEST MODE CHART
OPERATIONAL MODE
TEST MODE
1. Make sure the unit is off.
2. Press and hold the On/Off button for 5 seconds to enter Test Mode.
3. Once the indicator light turns solid red, you can release the On/Off button.
4. The unit will now beep followed by a quick pulse of static stimulation starting with a level 1 and
increasing to 8.
Be careful not to touch the Contact Points during this testing sequence so you will not receive a static
correction. It is recommended that you use the Test Light Tool to test the correction.
5. At the end of the test the unit will power off, indicated by a long tone and a solid red light.
6. Turn the unit back on using the On/Off button to resume normal operation.
8
FOR A LISTING OF TELEPHONE NUMBERS IN YOUR AREA, VISIT OUR WEBSITE AT WWW.SPORTDOG.COM.
INDICATOR LIGHT
Solid red
SPEAKER FUNCTION
Beeps 8 times, 1 time before each stim

Publicidad

Tabla de contenido
loading

Tabla de contenido