Dimensions Use To Adjusting The Looper And The Needle Guard - JUKI MO-6804D Manual De Instrucciones

18. DIMENSIONS USE TO ADJUSTING THE LOOPER AND THE NEEDLE
GUARD
WARNING :
1. To avoid possible accidents due to unfamiliarity with the machine, get a maintenance man who has
a good knowledge of the machine or serviceman of our distributor to adjust the machine or replace
any of its parts.
2. To avoid possible personal injury when the machine starts, it has to be ascertained in prior to the
actuation of the machine that no screws are loosened and no components come in contact with one
another.
The dimensions given in the table are standard ones to be used to adjust the looper. They are
intended to be used for reference and should be changed more or less in accordance with the
sewing products and thread to be used.
Model
MO6804D-0E4-30H
MO6814D-BD6-24H
MO6814D-BE6-34H
MO6814D-BE6-24H
MO6814D-BD6-30H
MO6814D-BB6-30P
MO6814D-BE6-30P
MO6814D-BE6-40H
MO6814D-BE6-44H
MO6816D-DE4-30H
MO6816D-DE4-30H-E35
MO6816D-DE4-30P
MO6816D-FF6-50H
04
A
14
A
B
A
C 16
A B C
10.4-10.6 -
10.4-10.6 (9.1)
10.4-10.6 (9.1)
10.4-10.6 (9.1)
10.4-10.6 (9.1)
10.4-10.6 (9.1)
10.4-10.6 (9.1)
11.8-12 (10.5)
11.8-12 (10.5)
10.4-10.6 - (10.8)
10.4-10.6 - (10.8)
10.4-10.6 - (10.8)
11.8-12 - (10.8)
E
D
E
D
0.05 to 0.2 mm
D
- (10.8) 4.8-5.2
- (10.5) 5.4-5.7
- (10.5) 5.4-5.7
- (10.5) 5.4-5.7
- (10.5) 5.4-5.7
- (10.5) 5.4-5.7
- (10.5) 5.4-5.7
- (12) 5.4-5.7
- (12) 5.4-5.7
(10.8) 4.8-5.2
(10.8) 4.8-5.2
(10.8) 4.8-5.2
(12) 4.8-5.2
– 24 –
(Unit : mm)
F
0.01 to 0.1 mm
E F
3.7-3.9
3.7-3.9
3.7-3.9
3.7-3.9
3.7-3.9
3.7-3.9
3.7-3.9
4.1-4.3
4.1-4.3
3.7-3.9
3.7-3.9
3.7-3.9
4.1-4.3
G
G
-
-
-
-
-
-
-
-
-
1.4-1.9
1.4-1.9
1.4-1.9
1.6-2.3