Switching On And Off; Switching On The Appliance; Switching Off The Appliance - melitta Caffeo BISTRO Manual De Instrucciones

5

Switching on and off

5.1

Switching on the appliance

• Switch the power switch (Fig. B, No. 20) to position „I".
→ The appliance is in stand-by mode. The ON/OFF button
• Place a suitable vessel under the outlet.
• Press the ON/OFF button
→ The ON / OFF button
The appliance performs an automatic rinse and hot water fl ows out of the
outlet. Then the ON/OFF button
The appliance is ready for operation.
5.2

Switching off the appliance

• If possible, place a vessel under the outlet.
• Press the ON/OFF button
mode.
→ The appliance performs an automatic rinse of the coffee lines. The brewing
chamber goes into resting position. The ON/OFF button
• Switch the power switch (Fig. B, No. 20) to position „0" to turn off the
appliance completely.
Notes
– The appliance performs an automatic rinse every time it is switched on.
– When the appliance is in stand-by mode, only switch it off using the power
switch, otherwise there is a danger that the brewing unit will not be in the
correct position.
to switch the appliance on.
fl ashes. The appliance heats up.
and the bean symbols
to switch the appliance to stand-by
lights up red.
illuminate.
lights up red.
55