Switching On And Off; Switching On The Appliance; Switching Off The Appliance - melitta Caffeo Bistro Manual De Instrucciones

5

Switching on and off

5.1

Switching on the appliance

Switch the power switch (Fig. B, No. 20) to position „I".
•
→ The appliance is in stand-by mode. The ON/OFF button
• Place a suitable vessel under the outlet.
• Press the ON/OFF button
→ The ON / OFF button
The appliance performs an automatic rinse and hot water flows out of the
outlet. Then the ON/OFF button
The appliance is ready for operation.
5.2

Switching off the appliance

• If possible, place a vessel under the outlet.
• Press the ON/OFF button
mode.
→ The appliance performs an automatic rinse of the coffee lines. The brewing
chamber goes into resting position. The ON/OFF button
Switch the power switch (Fig. B, No. 20) to position „0" to turn off the
•
appliance completely.
Notes
– The appliance performs an automatic rinse every time it is switched on.
– When the appliance is in stand-by mode, only switch it off using the power
switch, otherwise there is a danger that the brewing unit will not be in the
correct position.
54
Heft_Caffeo_Bistro_EU_2.2.indd 54
to switch the appliance on.
flashes. The appliance heats up.
and the bean symbols
to switch the appliance to stand-by
lights up red.
illuminate.
lights up red.
09.04.2014 14:33:51