Replacing Starter Rope And Rewind Spring - Stihl FC 100 Manual De Instrucciones

English / USA
Replacing Starter Rope
and Rewind Spring
1
2
1
Replacing the starter rope
: Move slide control in direction of
c – arrow to STOP-O.
: Take out the screws (1).
: Lift the starter cover (2) off the
housing.
28
1
: Remove the spring clip (3).
: Remove the rope rotor with
washer (4) and pawl (5).
3
4
5
:
:
6
Remove remaining rope from the
rotor and grip.
Tie a simple overhand knot in the
new rope (see "Specifications") and
then thread it through the top of the
grip and the rope bushing (6).
FC 100