Inserting The Melitta ® Claris ® Water Filter - melitta Caffeo Bistro Manual De Instrucciones

6 Inserting the Melitta
A Melitta Claris
®
and other contaminants. Please only insert it after starting up the appliance for
the first time. When using the filter, the appliance does not require descaling as
often, and the water hardness can be set to 1 (you can find more information on
page 60). The service life of your appliance will be extended thanks to the reliable
protection from lime scale. The water filter should be changed regularly; however,
after two months at the latest.
• Set the current month on the blue ring on top of the Melitta
water filter. This way, you can easily see when it is time to change the
Melitta Claris
®
• Put the water filter in a glass with fresh tap water for several minutes
before you insert it.
Lift the lid of the water tank (Fig. A, no. 3) and pull the water tank up
•
and out of the appliance.
• Empty the water tank.
• Carefully screw the Melitta
base of the water tank using the screw-in aid at the bottom end of the
coffee scoop provided.
• Fill the water tank to the max. mark with fresh tap water and reinsert it.
• Place a vessel under the Perfect Cappuccino and push the steam pipe
downwards until it is positioned below the brim of the vessel.
Turn the valve switch (Fig. A, no. 6) clockwise to open the valve.
•
→ Water now runs into the vessel beneath the Perfect Cappuccino. Due to the
automatic stop function, you must open and close the valve switch several
times.
• As soon as the water tank symbol
anti-clockwise to close the valve.
→ The appliance is ready for operation.
Heft_Caffeo_Bistro_EU_2.2.indd 55
water filter is supplied with the appliance for filtering out lime scale
®
water filter.
®
Claris
®
Claris water filter
® ®
water filter into the thread on the
®
illuminates, turn the valve switch
Claris
® ®
55
09.04.2014 14:33:51