Installation Area; Important - Corghi Artiglio Uniformity Manual De Uso

3.3. INSTALLATION AREA

The machine must be installed in accordance with all applicable safety regula-
tions, including but not limited to those issued by OSHA.
RISk OF EXPLOSION OR FIRE. Never use the machine in an area where it will be exposed
to flammable vapours (gasoline, paint thinners solvents, etc.). Never install the machine
in a recessed area or below floor level.
IMPORTANT: for the correct and safe operation of the machine, the lighting level in
the place of use should be at least 300 lux.
do not install the machine outdoors. It is designed to be used in closed, covered
areas.
Install the tyre changer in the chosen work position, complying with the minimum clearances
shown in Fig.7.
900 mm
Artiglio Uniformity User Manual
CAUTION!
DANGER
CAUTION!
EN
7
121