Deflating The Tyre; Bead Breaking - Corghi Artiglio Uniformity Manual De Uso

A - Fit the flange
B - Fit the centring handle in the hole in the flange and in the centre hole of the wheel.
C - Turn the centring handle clockwise to engage correctly with the turntable.
D - Tighten the clamping device by turning the handles 2 clockwise.

6.3. dEFLATING THE TYRE

Remove valve core to fully deflate the tyre (Fig. 26).

6.4. BEAd BREAkING

Bead breaking is well known to be a dangerous operation. It must be carried out
in accordance with the instructions below.
Applying the upper bead breaker
- Lower the upper bead breaking unit
from its rest position to its working
position with the lever
- Bring the disc towards the wheel by
pressing the button
Artiglio Uniformity User Manual
CAUTION!
(Fig. 27).
and then
26
EN
27
135