Corghi Artiglio Uniformity Manual De Uso página 142

When demounting, if the tool cannot tip the
bead over the rim completely to begin the
demounting process, the tyre bead may still
be (or recently have been) inverted in the
bead breaking zone. In this case, the bead
must be returned to the correct position
inside the drop centre of the wheel. This
operation can be assisted with any tool you
wish (clamp provided, pliers, bead presser
or lever).
When demounting, if the tool cannot hold the upper bead
in position to permit demounting, the lower bead may
have been incompletely demounted. Use the lower bead
breaker to both break the bottom bead and prevent it
from returning into its seat.
demounting the lower bead
(demounting using tool holder head)
A- Push the bead breaker disc against the bottom bead using the control
B- Using control
142
CAUTION!
CAUTION!
(Fig. 45), operate the hook and engage the bottom bead of the tyre.
Artiglio Uniformity User Manual
(Fig. 45).