Wheel Diagnostic Procedure; Wheel Measurement - Corghi Artiglio Uniformity Manual De Uso

7. WHEEL DIAGNOSTIC PROCEDURE

This function is used to determine the causes of vibration resulting from geometric defects
of the wheel and/or geometric and/or structural defects of the tyre.
If a wheel assembly is mounted with geometric defects found in both the wheel and the
tyre, the effects of these defects on the wheel assembly may be minimised by compen-
sating the deformation of the wheel with the deformation of the tyre.
Select one of the four following programmes to measure for defects:
- RIM MEASUREMENT

- WhEEL MEASUREMENT

- RIM AND TyRE MEASUREMENT
- COMPLETE MEASUREMENT
and press the 'next' button
An exploding tyre and rim may be propelled upward and outward with enough
force to cause serious injury or death. Never exceed the load index indicated on
the sidewall of the tyre. This tyre changer is not a safety device and will not restrain
exploding tyres and rims. keep unauthorised persons away from the working area.
If strange or unusual noises are heard, if a component or system is not operating
correctly or if you observe anything unusual, stop the machine immediately by press-
ing the emergency stop button or releasing the pedal.
Pressing the emergency stop button arrests the machine in its current position.
Releasing the rotation pedal returns the machine to its initial configuration.
156
.
DANGER
CAUTION!
Artiglio Uniformity User Manual