Mounting the lower bead (fig. 53)
A- Place the bottom bead
of the tyre underneath the
tool and simultaneously
apply a little pressure to
the tyre by hand while ro-
tating the wheel (pedal 1)
to facilitate bead insertion.
B - Rotate until tyre mount-
ing is complete.
Positioning upper bead (fig.54)
- Position the upper bead of the tyre as
shown in fig.54.
Take care that the tyre does not slip underneath the tool.
Positioning bead break-
er disc (fig.55)
A- Lower the bead break-
er disc (control
Fig. 55).
Artiglio Uniformity User Manual
CAUTION!
A
A
B
B
53
54
EN
A
55
147