Device Connections; Emergency Stop Button; Control Panel - COOK Medical H-30 Manual Del Usuario

Chapter 1
Introduction

Device Connections

The H-30 contains one laser source, emitting at 2.1 µm. The laser is delivered through an
optical fiber (holmium laser fiber) connected to the Laser Aperature. (See figure 1.)
Key Switch
The key switch turns the device on. There are two positions on the switch: 'I' (on) and 'O'
(off). To power on the device, insert the key and turn it clockwise to the on position. To
power off, turn the key to the off position and remove it. (See figure 2.)

Emergency Stop Button

The emergency stop button allows the immediate shutdown of the device. In case of an
emergency, push the emergency stop button. To reset the emergency stop button, twist
and pull it out. (See figure 1.)

Control Panel

Figure 4
Cook Medical © 2012 Return to Table of Contents 1-7