Unpacking/Delivery; Machine Description; Operation Capabilities; Conventions - Nilfisk RS 501 Instrucciones De Uso

ENGLISH
WARNING!
The machine must be disposed of properly, because of the presence of toxic-harmful materials (oils,
–
batteries, plastics, etc.), which are subject to standards that require disposal in special centers (see
Scrapping chapter).
– If the machine is used according to the instructions, the vibrations are not dangerous. Vibration level at the
operator's body is 1.25 ft/s
While the engine is running the exhaust manifold heats up. Do not touch the muffler to avoid serious
–
scalding or fire.
– Do not run the engine if the oil level is low, to avoid damaging it seriously. Check the oil level with the
engine off and the machine on a level surface.
Do not run the engine if the air filter is not installed, to avoid damaging it.
–
– The engine coolant lines are under pressure. Perform any check when the engine is off and after having
allowed it to cool down. Even when the engine is cool, pay careful attention when opening the radiator cap.
The engine is equipped with a fan; do not stand near the engine when it is hot, because the fan can start
–
operating even if the machine is off.
– All diesel engine servicing procedures should be performed by an authorized Dealer.
Only use original spare parts or parts of matching quality for the diesel engine. Using spare parts of lower
–
quality can seriously damage the engine.
– See also the SAFETY RULES in the Diesel Engine Manual, which is to be considered an integral part of this
Manual.
WARNING!
Carbon monoxide (CO) can cause brain damage or death.
The internal combustion engine of this machine can emit carbon monoxide.
Do not inhale exhaust gas fumes.
Only use indoors when adequate ventilation is provided, and when an assistant has been instructed to look
after you.

UNPACKING/DELIVERY

The machine is delivered already assembled and ready-to-use, unpacking/installation procedures are not necessary.
Please check that the following items have been supplied with the machine:
– Technical documents:
• Sweeper Instructions for Use
• Diesel Engine Manual
• Sweeper Spare Parts List

MACHINE DESCRIPTION

OPERATION CAPABILITIES

This sweeper has been designed and built to be used by a qualified operator to clean (by sweeping and suctioning) roads, smooth
and solid floors, in civil and industrial environments, and to collect dust and light debris under safe operation conditions.

CONVENTIONS

Forward, backward, front, rear, left or right are intended with reference to the operator's position, while on the driver's seat (17, Fig. E).
6
INSTRUCTIONS FOR USE
) (ISO 2631-1) at maximum working speed (2,200 rpm).
2 (0.38 m/s 2
33015498(3)2008-02 RS 501