Nilfisk RS 501 Instrucciones De Uso página 39

Maintenance
Diesel engine start-up safety system check
Tire pressure check
Suction inlet and skirt height and operation check
Side broom position check and adjustment
Engine oil change
Dust control system water filter cleaning
Parking brake check
Alternator belt tension check
Climate control system compressor belt tension check
Diesel engine oil filter replacement
Fuel filter replacement
Nut and screw tightening and leakage check
Lubrication
Engine coolant line sleeve check
Drive system pump oil filter check
Hydraulic system oil drain filter replacement
Hydraulic system oil suction filter replacement
Alternator belt replacement
Cab air filter replacement
Injector calibration and cleaning
Climate control system belt replacement
Engine coolant change
Hydraulic system oil change
Brake system check
Hydraulic system pump pressure check
Minor engine overhaul
Major engine overhaul
(1) Or every 6 months
(2) Maintenance to be performed by Lombardini authorized Service Center
(3) Or every 2 years
(4) After 5,000 hours
(5) After 10,000 hours
(6) For the relevant procedure see the Service Manual, at any Nilfisk Service Center
(7) Every year, if the machine is not frequently used
(8) If a lower-quality oil is used, change it every 125 hours.
INSTRUCTIONS FOR USE
Running-in Every 10
period (after the hours or
first 50 hours)
before use
(6)
(6)
(6)
(6)
RS 501 33015498(3)2008-02
ENGLISH
Every Every Every
200 600 1,200
hours hours hours
(6)
(7)(8)
(7)
(6)
(7)(8)
(7)
(6)
(6)
(7)(6)
(6)
(6)
(6)
(3)(6)
(1)
(2)(3)(6)
(6)
(3)(6)
(3)(6)
Every
Long
2,400
periods
hours
(6)
(6)
(2)(4)(6)
(2)(5)(6)
23