Environmental Conditions - Nilfisk RS 501 Instrucciones De Uso

Hydraulic system data
Maximum drive system pressure
Maximum accessory system pressure
Hydraulic system oil (at ambient temperature above +50°F (+10°C))
NOTE
If the machine is to be used at ambient temperatures below +50°F (+10°C), the oil should be replaced with equivalent oil
having a viscosity of 32 cSt. For temperatures below +32°F (0°C), use oil with lower viscosity.
(****) See the hydraulic system oil technical data and reference data tables below.
SPECIFICATIONS - Hydraulic system
AGIP ARNICA
Viscosity at +104°F (+40°C)
Viscosity at +212°F (+100°C)
Viscosity index
Flash point COC
Pour point
Density at +59°F (+15°C)
Climate control system data (optional)
Gas type
Gas quantity

ENVIRONMENTAL CONDITIONS

In the environment where the machine operates, there must not be any danger of explosion.
To avoid inhaling exhaust gas, the machine must be used only where there is a proper ventilation.
The machine operates correctly (*) in the following environmental conditions:
– Temperature: +14°F to +104°F (-10°C to +40°C)
– Humidity: 30% to 95%
(*) When using the sweeper at a temperature between +14°F and +32°F (-10°C and 0°C) the dust control system cannot be used;
moreover the water tanks and the dust control system itself must be empty.
INSTRUCTIONS FOR USE
/ 46 32
mm²/s 45 32
mm²/s 7.97 6.40
/ 150 157
°F (°C) 419 (215) 396 (202)
°F (°C) -33 (-36) -33 (-36)
kg/l
0.87 0.865
RS 501 33015498(3)2008-02
ENGLISH
Values
3,626 psi (250 Bar)
1,740/2,900 psi (120/200 Bar)
AGIP Arnica 46 (****)
REFERENCE DATA - Hydraulic oil
ISO-L-HV
ISO 11158
AFNOR NF E 48603 HV
AISE 127
ATOS Tab. P 002-0/I
BS 4231 HSE
CETOP RP 91 H HV
COMMERCIAL HYDRAULICS
Danieli Standard 0.000.001 (AGIP ARNICA
22, 46, 68)
EATON VICKERS I-286-S3
EATON VICKERS M-2950
DIN 51524 t.3 HVLP
LAMB LANDIS-CINCINNATI P68, P69 and P70
LINDE
PARKER HANNIFIN (DENISON) HF-0
REXROTH RE 90220-1/11.02
SAUER-DANFOSS 520L0463
Values
Reclin 134a
1.8 lb (0.8 kg)
11