Gima 32926 Manual Del Usuario página 42

Recommended separation distances between portable and mobile RF communication
equipment and the device.
The device is intended for use in an electromagnetic environment where radiated RF disturbances
are under control. User can help prevent electromagnetic interference by keeping the device
at a minimum distance from portable and mobile RF communications equipment (transmitters).
Below table details the maximum output power of transmitter:
Rated maximum
output power
of transmitter
(W)
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in metres (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according
to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
ENGLISH
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
Not applicable
-
-
-
-
-
of transmitter (m)
80 MHz to 800 MHz
d = 1.2
0,12
0,38
1,2
3,8
12
800 MHz to 2.5 GHz
d = 2.3
0,23
0,73
2,3
7,3
23
42