Installing Batteries - Gima 32926 Manual Del Usuario

32
ENGLISH
*Note!
The above table is not exact for classification of blood pressure and it's intended to be used as
a guide in understanding non-invasive blood pressure measurements.
Usually this is not a cause for concern; however we recommend you consult with your physician
for proper diagnosis or seek medical advice according to our recommendation mentioned above.
Please note that the device does not appropriate to diagnose hypertension, and it is only for user
reference on blood pressure monitoring.
data link Function
The monitor is equipped with data link interface to allow user to transfer the blood pressure
measurements to a personal computer via a USB cable. Thus you may easily view and track the data
stored in the memory.
Step:
1. Plug USB cable (large connector) into personal computer.
2. Plug USB cable (small connector) into Data Link Port to our monitor.
3. Once USB cable is connected successfully, the monitor will show
"USb" on the screen, indicating that it is ready to transmit data.
*Note!
• Do not allow objects to come into contact with Data Link Port.
• The data cannot be transferred while taking a measurement.
• Do not unplug USB cable or turn off the computer during transmission.

InstallInG battErIEs

When LOW BATTERY SYMBOL appears on the display,
or nothing appears on the display when the power
is switched on, please change the batteries.
Replace all the batteries with new ones and do not mix
new and old batteries. Do not mix alkaline, standard
(carbon-zinc) or rechargeable (cadmium) batteries either.
It may shorten the battery life or cause the device
to malfunction.
Remove the battery cover and insert 2 AAA alkaline batteries
into the battery compartment as shown.