Handling Residual Volumes; Options - BRAND HandyStep touch Instrucciones De Manejo

10.4.1 Executing the learn function
a.
c.
10.4.2 Alternative access to the learn function
a. Open Options via the
b. Swipe the switch to the right.
c. Return to the work menu via the
ð The ... symbol indicates that the learn function is active.
10.4.3 Restarting the learn function
If while operating the device you notice that the pause time is too long or too short, you can restart
the learn function. Alternatively, you can also adjust the pause time manually.
10.4.4 Stopping or shortening the learn function
The first time the STEP button is pressed, a 10-second countdown begins. When the countdown ex-
pires, the learn function ends automatically.
• To stop the learn function beforehand, tap on the X button.
• To stop the learn function after you have dispensed liquid by holding the STEP button, tap on
the ... button.
• To use the calculated pause time immediately, hold down the STEP button.

10.5 Handling residual volumes

For information on handling residual volumes, see Switching to emptying, p. 80 and Aspirating liq-
uid, p. 78.

10.6 Options

a. In the operating mode, tap on the symbol
ð The Options menu appears.
HandyStep® touch, HandyStep® touch S 997486
Prerequisite:
> You have already filled the tip.
a. Tap on the
ð The learn function is activated. This is indicated by the
...symbol.
b. Dispense liquid at least 3 times, by briefly pressing the
STEP button.
ð You can immediately dispense liquid by holding down
the STEP button. The learned pause time changes as long
as the learn function is not stopped.
c. Stop the learn function by tapping the ... button.
ð Afterwards, the average time appears next to the
symbol.
You can also save the learned pause time in Favorites.
button.
button.
.
10 Auto-Dispensing (AUTO-DISP)
button.
87
Operating manual