Factory Settings; Switching Tip Detection On/Off; Keypad - BRAND HandyStep touch Instrucciones De Manejo

ð If the date of the last calibration is after the current date, it is shown in red.
ð If the date of the future calibration is before the current date, it is shown in red and the reminder
cannot be activated.

8.9 Factory settings

The device can be reset to the factory settings in this menu item.
Factory settings
The factory settings overwrite all settings made by the user, both in the settings menu and in all
available operating modes. This action cannot be reversed.

8.10 Switching tip detection on/off

If you are not working with BRAND tips or other compatible tips, you can switch off automatic tip de-
tection, in order to reach the volume setting quicker.

8.11 Keypad

6 4
5
HandyStep® touch, HandyStep® touch S 997486
NOTICE
1 Available value range
1
2 Unit selection
3 Delete entered characters one at a time
2
4 Enter comma
5 Discard entry
6 Apply entry
Enter values (e.g. volume) via a keypad in the different oper-
3
ating modes. Values are entered from left to right, together
with the comma. Depending on the available value range
and the possible STEP intervals, up to 3 decimal places can
be entered. Values less than or greater than the value range
shown cannot be applied.
8 Settings
83
Operating manual