Connecting The Battery; Charging The Battery; Indicators On The Display; Standby Mode - BRAND HandyStep touch Instrucciones De Manejo

5.3.1 Connecting the battery

A
Open the cover and connect the battery's reverse polarity protected plug firmly and straight into the
socket. The device switches on when you have connected the battery. Then close the cover.

5.3.2 Charging the battery

5.3.3 Indicators on the display

Battery is ready for operation.

5.3.4 Standby mode

If the power button is pressed when the device is switched on, the device goes into standby mode and
the display is turned off. Standby mode is used to extend battery life. To exit Standby mode, perform
one of the following actions:
• Press the power button.
• Press the STEP button.
• Insert a tip.
5.3.5 Working while charging
You can continue to work while the device is charging. To do this, plug the USB cable into the multi-
function jack on the device. The charging time is prolonged as a result. Working with the USB cable
plugged-in is only possible if the battery is connected to the device.
HandyStep® touch, HandyStep® touch S 997486
B
a. Connect the cable to the power adapter and HandyStep®
touch.
b. Plug the power adapter into the power outlet.
ð HandyStep® touch is charging.
Battery is almost empty.
5 Functions and controls
C
Battery is charging.
Operating manual
69