Multi-Dispensing (Multi-Disp); Aspirating Liquid; Interrupting And Resuming Liquid Aspiration; Dispensing Liquid - BRAND HandyStep touch Instrucciones De Manejo

9 Multi-Dispensing (MULTI-DISP)

9 Multi-Dispensing (MULTI-DISP)
For information on the function of this mode, see Overview of modes, p. 75. For information on setting
the volume, speed, and other steps found in all modes, see Operation, p. 76.

9.1 Aspirating liquid

9.2 Interrupting and resuming liquid aspiration

9.2.1 Interrupting liquid aspiration
a. To stop liquid aspiration, briefly press the STEP button.
9.2.2 Resuming liquid aspiration
a. Tap on the
b. Press the STEP button 2 times in quick succession.
ð The device aspirates liquid.

9.3 Dispensing liquid

84
Operating manual
Prerequisite:
>
a. Hold the tip vertically in the vessel.
b. During aspiration, make sure that the tip opening is al-
c. Press the STEP button.
ð The device aspirates the liquid until the set volume or the
The
The
button.
Prerequisite:
>
a. After pressing the STEP button, the number of STEPs to
The STEP volume has been set via the button.
ways covered by liquid, in order to prevent air bubbles in
the tip.
nominal volume is reached.
symbol displays the number of possible STEPs.
symbol displays the available volume.
Dispensing volumes or individual STEPs, see Dispensing
volumes or individual STEPs, p. 80.
be dispensed ( ) decreases.
HandyStep® touch, HandyStep® touch S 997486