Timer Set Up - Dalla Corte DC PRO Manual De Usuario

Timer set up

This machine is equipped with a weekly switch on/
off timer for each machine group heads and boiler.
This timer has 2 switch-on/off options for each unit
(group heads and boiler). Switching off options are:
1. Off option - the unit switches off completely,
2. Safety option - the unit will reach a lower tem-
perature considered safe ad convenient in terms
of energy saving.
To access the timer menu, follow these instruc-
tions: Press the MENU button (PD3).
Enter the user's password, which consists of four
digits. The default password is "0000".
To enter the password press the navigation but-
ton (PD1) until the requested digit is displayed and
confirm by pressing the ENTER button
Confirm the last digit pressing the OK button (PD4).
46
If the password is wrong, ERROR PASSWORD will
be shown on the display. After few seconds, the
main menu will be shown.
If the password is correct, the display will show
what follows:
1. If you do not want to use the automatic timer, use
the navigation buttons (PD1) and
NO, then press the ENTER button (PD3) to confirm.
In this mode, group heads and boiler must be swit-
ched off manually.
(PD3 Pic. 3).
2. Press the ENTER button (PD3) to confirm.
3. If you want to start timer set up, use the naviga-
tion buttons (PD1) and (PD2) to select YES. Press
the ENTER button (PD3) to confirm.
(PD2) to select