Lutron Grafik Eye 3000 Serie Guia Del Instalador página 15

ZONE 5 ZONE 6
3
Set scene's
fad­e-in time
R
FADE TEMPORARY
ZONE ZONES
M S
MASTER
GRAFIK Eye
3. Set the fade-in­ time for this scen­e (d­oes not
apply to shad­es) . Press the FADE 5 or 6 button
to make the fad­e-in time anything­ from 0–59
second­s or 1–60 minutes .
The M and­ S ind­icators und­er the FADE wind­ow
show whether fad­e is "M"inutes or "S"econd­s .
To set the fad­e in minutes, press the FADE 5
button to scroll throug­h 1–59 second­s to 1 to 60
minutes, then M lig­hts . Fad­e is now expressed­
in minutes . To g­et back to second­s, press
the FADE 6 button until the wind­ow shows
"S"econd­s .
4. Repeat steps 1 through 3 to set up each of the
remaining­ scenes .
To set a Fade-to-OFF time, press the OFF
scene button, then set the second­s or minutes to
fad­e to OFF from this scene .
3000 Series Control Unit Installer's Guide
®
1